SA423/A423M Electric Welded Low Alloy Steel Tubes
Product Details
weldable steel pipe
,welding round tubing
SA423/A423M Grade 1 , Grade 2 , Grade 3 electric welded steel pipe , Electric-Welded Low-Alloy Steel Tubes
Standard Specification for
Seamless and Electric-Welded Low-Alloy Steel Tubes1
1. Scope
1.1 This specification2 covers minimum-wall-thickness, seamless and electric-resistance welded, low-alloy steel tubes
for pressure containing parts such as economizers or other applications where corrosion resistance is important.
1.2 The tubing sizes and thicknesses usually furnished to this specification are 1⁄2 to 5 in. [12.7 to 127 mm] in outside
diameter and 0.035 to 0.500 in. [0.9 to 12.7 mm] inclusive, in minimum wall thickness. Tubing having other dimensions may
be furnished, provided such tubes comply with all other requirements of this specification.
1.3 Mechanical property requirements do not apply to tubing smaller than 1⁄4 in. [3.2 mm] in inside diameter or 0.015
in. [0.4 mm] in thickness.
1.4 An optional supplementary requirement is provided and, when desired, shall be so stated in the order.
1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. Within the text, the
SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system
shall be used independently of the other. Combining values from the two systems may result in non-conformance with the
standard. The inch-pound units shall apply unless the “M” designation of this specification is specified in the order.
2. Referenced Documents
2.1 ASTM Standards:3
A450/A450M Specification for General Requirements for Carbon and Low Alloy Steel Tubes
E213 Practice for Ultrasonic Testing of Metal Pipe and tubing
E273 Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing
8. Tensile Requirements
8.1 The material shall conform to the requirements as to tensile properties prescribed in Table 3.
9. Hardness Requirements
9.1 The tubes shall have a hardness number not exceeding 170 HB or 87 HRB.
10. Forming Operations
10.1 Tubes when inserted in the boiler shall stand expanding and beading without showing cracks or flaws.
| Composition,% | Grade 1 and | Grade 3 | ||||
| Grade 1 | Garde 2 | Grade 3 | 2 | |||
| Carbon,max | 0.15 | 0.15 | 0.06 | Tensile strength,min,ksi(Mpa) | 60(415) | 55(380 |
| Manganese | 0.55 max | 0.50-1.00 | 0.70-1.40 | Yield strength,min,ksi(Mpa) | 37(255) | 33(230) |
| Phosphorus | 0.06-0.15 | 0.04 max | 0.020 max | Elongation in 2 in.or 50 mm,min,% | 25 | 35 |
| Sulfur,max | 0.060 | 0.05 | 0.020 | For longitudinal strip tests a | 1.25A | 1.25A |
| Silicon | 0.10 min | … | 0.55 max | deduction for each 1/32 in.(0.8 mm) | ||
| Copper | 0.20-0.60 | 0.30-1.00 | 0.25-0.45 | decrease in wall thickness below | ||
| Chromium | 0.24-1.31 | … | … | 5/16 in.(8 mm)from the basic | ||
| Nickel | 0.20-0.70 | 0.40-1.10 | 0.50 max | minimum elongation of the following | ||
| Molybdenum | … | 0.10 min | 0.20 max | percentage points shall be made | ||
| Antimony | … | … | 0.05-0.15 | |||
FAQ:
1. Can you provide a sample to check the quality?
We can provide free sample with same or similar sizes for you to check tube quality.
You need to in charge of Express costs.
2. How about your production capacity?
3000 tons/Month.
3. What are your terms of payment?
30%TT in advance, Balance to be paid before shipment.
4. Where is your factory?
Jiaxing city, 2 hours away from Shanghai.
5. How can I get the quotation A.S.A.P?
Please send us an inquiry with full details as following,quotation will sent to you A.S.A.P:
1). Tube Standard
2). Steel Grade
3). Tube Size and Size Tolerance
4). Tube length
5). Quantity
6). If any special requirements
6. How about the minimum order quantity?
Normally for one size above 1 ton.
Welcome to contact us! Thanks.
-
DIN2391 Precision Seamless Steel Tube
Product Name: DIN2391 Cold Drawn Precision Seamless Steel Tube Material: ST35, ST45, ST52 Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Delivery Condition: BK, BKW, BKS, GBK, NBK Application: For high precision purpose, auto industry, like manipulator, Shock Absorber, Transmission Shaft, Steering Gear, Car Frame, etc. Stable Quality with Comeptitive Price. NBK(Bright Annealing) Heat Treatment, Surface is clean and smooth, without oxide scale Good -
SAE4130 Honed Hydraulic Cylinder Seamless Steel Tube
Product Name: SAE4130 ASTM A519 CW / SR Seamless Mechanical Tubing Honing Round Steel Tubing Size Range: OD: 40-500mm, WT: 1-30mm, Length: 5.8m/6m, maximal 11.8m Product Name ASTM A519 CW / SR Seamless Cold Drawn Honing Steel Tubing Material St35, St45, St52, E355, E255, 1020, 1045, 4130 Delivery Condition CW, SR Standard DIN2391 / EN10305-1 / ASTM A519 / GB3639 Size Range OD: 40-500mm, WT: 1-30mm Application High precision purpose, auto parts, oil cylinder, etc Round Billet -
E255 / St45 / 1020 Bright Annealed Cold Rolled Steel Tube
Product Name: E255 / St45 / 1020 Bright Annealing Precision Cold Rolled High Precision Seamless Steel Pipe Material: E235 , E255 , E355, St35, St45, St52, 1010, 1020, 4130 Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Delivery Condition: +C, +LC, +SR, +A, +N Application: Fuel injection Pipe, Oil flow pipeline Automobile and motorcycle Shock Absorber Pipe Seat lifter Pipe Hydrau-cylinder Pipe Bicycle frame steel pipes Mechanical steel pipes for auto and -
Black Drill Rod Seamless Drill Pipe High Tolerance 3 - 11.8m Length 2 - 15m WT Size
XJY750 XJY850 wire-line drill pipes , Seamless cold drawing pipes for drill rod 1. Product Name: XJY850 Seamless Steel Tubing wire-line drill rods 2. Size Range: OD: 45-114.3m, WT: 2-15mm, Length:3m,3.06m 5.8m/6m, maximal 11.8m 3. Stable Quality with Comeptitive Price 4. Protective Atmosphere Heat Treatment, Surface is clean and smooth, without oxide scale 5. Good Extending and Bending Ability, Longer Work Life Product Name Seamless Steel Tubing wire-line drill rods Material
