cold drawn seamless pipe
"
Durable Alloy Steel Seamless Pipes Cold Drawn / Cold Rolled 1 - 15mm Wt Size
JIS SCM415 SCM430 SCM435 SCM440 Cr-Mo Steel Tube For Mechanical and rubber parts application Material:SCM415 SCM430 SCM435 SCM440 Size Range: OD: 6-114.3mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Delivery Condition: CW, SR, A, N Application: For mechanical application Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing or Cold Rolling, On line inspection
Cold Deformed Seamless Rectangular Steel Tubing
GOST 8645-68 (rectangular, seamless cold-deformed pipes). Materials:Steel 35,Steel45,Steel10,Steel 20,etc Sizes of square pipes have to confirm the values indicated in the table below: Size A, mm Size B, mm Wall thickness s, mm Section square, cm2 Weight of1 mpipe, kg, Inertia moment, cm4= Resistance moment, cm3= Ix Iy Wx Wy 90 60 5 13.57 10.65 75.04 142.8 25.01 31.75 120 80 8 28.34 22.25 268.4 514.5 67.11 85.76 Steel density 7/85 g/cm3 Mechanical composition Steel grade
SAE4130 SAE4140 Chrome Molybdenum Alloy Steel Seamless Tubes
Precision Chrome Molybdenum Alloy Steel Tube SAE 4130 / 4140 Alloy Seamless Steel Tube SAE4130/4140 Material:SAE1010, SAE1020, SAE4130, SAE4140 Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Delivery Condition: CW, SR, A, N Application: Fuel injection Pipe, Oil flow pipeline , Automobile and motorcycle Shock Absorber Pipe Seat lifter Pipe Hydrau-cylinder Pipe, Bicycle frame steel pipes Mechanical steel pipes for auto and motor parts Auto and Motorcycle
Good Durability Alloy Steel Seamless Pipes Round Steel Tubing Excellent Strength
30 30HGSA 30CrMnSiA Alloy Steel tubes steel pipes for oil and gas and geological drill pipes Application:seamless steel tubes for oil and gas and geological drill rods application 30 30HGSA 30CrMnSiA Chemical composition, % C Si Mn Ni S P Cr Cu 0.28 - 0.34 0.9 - 1.2 0.8 1.1 Up to 0.3 Up to 0.025 Up to 0.025 0.8 - 1.1 Up to 0.3 Temperature of 30HGSA material critical points. Ac1 = 760 , Ac3(Acm) = 830 , Ar3(Arcm) = 705 , Ar1 = 670 , Mn = 352 Mechanical properties,
High Precision Cold Rolled Steel Tube For Hydraulic Cylinder 1 - 15mm WT Size
Product Name: High Precision DIN2391 St35 BK Cold Rolled Steel Tube for Hydraulic CylinderMaterial: ST35, ST45, ST52Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8mDelivery Condition: 1. BK (+C) No heat treatment after last cold forming process.2. BKW (+LC) After last heat treatment there is a light finishing pass (cold drawing)3. BKS (+SR) After the final cold forming process the tubes are stress relieve annealed.4. GBK (+A) After the final cold forming
Seamless Bearing Steel Tube For Bearing Ring ASTM A295 Norm 100Cr6 Material
ASTM A295 SAE52100 100Cr6 GCr15 EN31 SUJ2 Seamless Bearing Steel Tubes for Bearing Ring 52100 Bearing Steel Tube: Process: Hot rolled: Steel bar+ Heating+Piercing+Hot rolled+ Cut+ Spheroidize annealed(optional)+Inspection+Package. Cold finished: As shown in the figure below. Size range: Outer diameter: Cold finished: 12-219 mm, Hot Rolled: 51mm-530mm Wall thickness: Cold finished: 1-40mm, Hot Rolled: 5mm-120mm Length: Not more than 12 m. AISI 52100 Chemical Composition The
Exact Dimension Large Diameter Steel Pipe , Pneumatic Power Systems / Seamless Hydraulic Tubing
1. Product Name: Seamless Cold Drawn Steel Tubes used for Hydraulic and Pneumatic Power Systems EN10305-4 E235 +N 2. Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m 3. Stable Quality with Comeptitive Price 4. +N(Normalized) Heat Treatment, Surface is clean and smooth, without oxide scale 5. Good Extending and Bending Ability. Product Name EN10305-4 Seamless Cold Drawn Steel Tube Material E235, E255, E355 Delivery Condition +N (Normalized) Standard EN10305-4
Cold Drawn / Rolled Seam Welded Pipe , 35Mn2 Scaffolding Steel Pipe For Automotive Parts
Product Name: 35Mn2 Seamless Alloy Cold Drawn / Cold Rolled Steel Tube Automotive Parts Tubing Material: 35Mn2 Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Cold Rolled process on the seamless steel tubes, to reach high accuracy on the OD and WT tolerance Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Rolling, On line inspection 5. Heat
Seamless Hydraulic Cylinder Steel Tube Cold Drawn Process 40 - 500mm OD Size
Product Name: Hydraulic Cylinder SAE1045 / C45E Seamless Cold Drawn Honed Steel Tube Size Range: OD: 40-500mm, WT: 1-30mm, Length: 5.8m/6m, maximal 11.8m Product Name Hydraulic Cylinder SAE1045 / C45E Seamless Cold Drawn Honed Steel Tube Material St35, St45, St52, E355, E255, 1020, 1045, 4130 Delivery Condition BK, BKS , +C , +SR Standard DIN2391 / EN10305-1 / ASTM A519 / GB3639 Size Range OD: 40-500mm, WT: 1-30mm Application High precision purpose, auto parts, oil cylinder,
