1MM U Bending ASTM A179 Condenser Tubes
Product Details
astm a179 condenser tubes
,condenser astm a179 tubes
,1MM Condenser Tubes
Seamless Low-Carbon Steel Heat-exchanger tubes/condenser tubes/boiler tubes/
Seamless Cold Drawn Steel Pipes/U-Bending tubes/U-Tubes/Bending tubes
The steel tubes produced by cold drawn process according to the Norm of ASTM A179/A179M
ASME SA179/SA179M mainly used for Heat-exchanger,boiler,condenser,superheater etc.
1.This specification covers minimum-wall-thickness,seamless cold-drawn low-carbon steel tubes for tubular
heat exchangers, condensers tubes, and similar heat transfer apparatus.
2.This specification SA179/A179 covers seamless tubes 1⁄8 to 3 in. [3.2 to 76.2 mm], inclusive, in outside diameter.
3.The referenced Documents : A450/A450M Specification for General Requirements for Carbon, Ferritic Alloy, and
Austenitic Alloy Steel Tubes
4.Seamless tubes shall be made by the seamless process and shall be cold drawn tubes.
5.Heat-treatment of Steel tubes shall be heat treated after the final cold draw pass at a temperature of 1200°F [650°C] or higher.
6.Surface of cold drawn steel tubes:Finished tubes shall be free of scale. A slight amount of oxidation will not be considered as scale.
7.Hardness:The tubes shall have a hardness number not exceeding 72 HRB.
8.Mechanical Tests Required:
1) Flattening Test—One flattening test shall be made on specimens from each of two tubes from each lot (Note 2) or fraction thereof.
2) Flaring Test—One flaring test shall be made on specimens from each of two tubes from each lot (Note 2) or fraction thereof.
3) Flange Test—When specified as a substitute for the flaring test, for tubes having a wall thickness (actual mean wall) less than 10 %
of the outside diameter, one test shall be made on specimens from each of two tubes from each lot (Note2) or fraction thereof. For tubes
other than specified above, the flange test shall not be required.
The Chemical Composition:
Chemical Composition Low-Carbon Steel Tube | C | Mn | P ≤ | S ≤ | Si ≤ |
| 0.06--0.18 | 0.27--0.63 | 0.035 | 0.035 | 0.25 |
Normal Stock Size of Heat-exchanger tubes:
| Heat-Exchanger Tubes | 19.05x1.65mm;19.05x2.11mm;25.4x2.11mm;25.4x2.77mm;38.1x1.65mm;38.1x3.05mm |
| Condenser Tubes | 19.05x1.65mm;19.05x2.11mm;25.4x2.11mm;25.4x2.41mm;38.1x1.65mm;38.1x2.11mm |
9.Low carbon Steel U-tubes/U-bending tubes/Bending tubes Pictures:
Tags: U-tubes;U-bending tubes;U tubes;heat-exchanger tubes;bending tubes;condenser tubes;
Low carbon Steel;SA179,A179,
-
DIN2391 Precision Seamless Steel Tube
Product Name: DIN2391 Cold Drawn Precision Seamless Steel Tube Material: ST35, ST45, ST52 Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Delivery Condition: BK, BKW, BKS, GBK, NBK Application: For high precision purpose, auto industry, like manipulator, Shock Absorber, Transmission Shaft, Steering Gear, Car Frame, etc. Stable Quality with Comeptitive Price. NBK(Bright Annealing) Heat Treatment, Surface is clean and smooth, without oxide scale Good -
SAE4130 Honed Hydraulic Cylinder Seamless Steel Tube
Product Name: SAE4130 ASTM A519 CW / SR Seamless Mechanical Tubing Honing Round Steel Tubing Size Range: OD: 40-500mm, WT: 1-30mm, Length: 5.8m/6m, maximal 11.8m Product Name ASTM A519 CW / SR Seamless Cold Drawn Honing Steel Tubing Material St35, St45, St52, E355, E255, 1020, 1045, 4130 Delivery Condition CW, SR Standard DIN2391 / EN10305-1 / ASTM A519 / GB3639 Size Range OD: 40-500mm, WT: 1-30mm Application High precision purpose, auto parts, oil cylinder, etc Round Billet -
E255 / St45 / 1020 Bright Annealed Cold Rolled Steel Tube
Product Name: E255 / St45 / 1020 Bright Annealing Precision Cold Rolled High Precision Seamless Steel Pipe Material: E235 , E255 , E355, St35, St45, St52, 1010, 1020, 4130 Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Delivery Condition: +C, +LC, +SR, +A, +N Application: Fuel injection Pipe, Oil flow pipeline Automobile and motorcycle Shock Absorber Pipe Seat lifter Pipe Hydrau-cylinder Pipe Bicycle frame steel pipes Mechanical steel pipes for auto and -
Black Drill Rod Seamless Drill Pipe High Tolerance 3 - 11.8m Length 2 - 15m WT Size
XJY750 XJY850 wire-line drill pipes , Seamless cold drawing pipes for drill rod 1. Product Name: XJY850 Seamless Steel Tubing wire-line drill rods 2. Size Range: OD: 45-114.3m, WT: 2-15mm, Length:3m,3.06m 5.8m/6m, maximal 11.8m 3. Stable Quality with Comeptitive Price 4. Protective Atmosphere Heat Treatment, Surface is clean and smooth, without oxide scale 5. Good Extending and Bending Ability, Longer Work Life Product Name Seamless Steel Tubing wire-line drill rods Material
